[1]张道达,朱华明,尧凳灿,等.10CrMoAl钢热轧薄板的周浸实验对比分析[J].江西师范大学学报(自然科学版),2018,(04):393-398.[doi:10.16357/j.cnki.issn1000-5862.2018.04.13]
 ZHANG Daoda,ZHU Huaming,YAO Dengcan,et al.The Study on Compared Analysis 10CrMoAl Hot Rolled Sheet[J].Journal of Jiangxi Normal University:Natural Science Edition,2018,(04):393-398.[doi:10.16357/j.cnki.issn1000-5862.2018.04.13]
点击复制

10CrMoAl钢热轧薄板的周浸实验对比分析()
分享到:

《江西师范大学学报》(自然科学版)[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2018年04期
页码:
393-398
栏目:
出版日期:
2018-08-20

文章信息/Info

Title:
The Study on Compared Analysis 10CrMoAl Hot Rolled Sheet
文章编号:
1000-5862(2018)04-0393-06
作者:
张道达朱华明尧凳灿肖艳琴
江西省机械科学研究所,江西 南昌 330002
Author(s):
ZHANG DaodaZHU HuamingYAO DengcanXIAO Yanqin
Jiangxi Mechanical Science Institute,Nanchang Jiangxi 330002,China
关键词:
周浸试验 腐蚀速率 交流阻抗试验 等效电路 钝化膜
Keywords:
cycle immersion test corrosion rate AC impedance test equivalent circuit passive film
分类号:
TG 172.5
DOI:
10.16357/j.cnki.issn1000-5862.2018.04.13
文献标志码:
A
摘要:
为了系统地研究10CrMoAl钢的耐腐蚀性能,对其周浸试验各周期试样进行了腐蚀速率分析、SEM分析、XRD分析及电化学分析.结果表明:腐蚀速率最快的阶段是72~168 h腐蚀阶段,其次是0~72 h腐蚀阶段,最慢的是168~240 h腐蚀阶段.经过168 h腐蚀后,锈层厚度平均为80 μm,是经过72 h腐蚀后的试样锈层厚度的近2倍.经过240 h的腐蚀后,锈层仍然维持在80 μm左右,却出现了50 μm的过渡层.经过168 h和240 h腐蚀所形成的锈层几乎完全阻止了γ-FeOOH和α-FeOOH等稳定产物的形成,从而有效地阻碍了基体的继续腐蚀.此外,锈层中Cr、Mo和Al的富集,也对阻碍腐蚀的进行起到一定的作用.
Abstract:
In order to systematically study the 10CrMoAl steel corrosion resistance,the corrosion rate analysis,SEM analysis,XRD analysis and electrochemical analysis of the each cycle samples in the cyclic immersion test are implemented.The results show that the stage of the fastest corrosion rate is 72-168 h corrosion stage,the second stage is 0-72 h corrosion stage,and the slowest stage is 168-240 h corrosion stage.After 168 h corrosion,the average rust layer thickness is 80 μm,which is nearly two times asaverage rust layer as the sample after 72 h corrosion.After 240 h corrosion,rust layer remain at about 80 μm,however,the transition layer whose thickness is about 50 μm has come up.The rust layer formed by 168 h and 240 h corrosion almost completely prevents the formation of γ-FeOOH and α-FeOOH,which effectively hinders the corrosion of matrix.In addition,the enrichment of Cr,Mo and Al in rust layer play a part in the inhibition of corrosion.

参考文献/References:

[1] Saraf S,Molotskii M,Rosenwaks Y.Local measurement of surface states energy distribution in semiconductora using Kelvin probe force microscope[J].Applied Physics Letters,2005,86(17):172104-172107.
[2] 傅欣欣,董俊华,韩恩厚,等.低碳钢Q235在模拟酸雨大气腐蚀条件下的电化学阻抗谱监测[J].金属学报,2014,50(1):57-63.
[3] 安闻迅,邓春龙,杜敏,等.低合金钢实海腐蚀电化学阻抗谱研究[J].装备环境工程,2009,6(1):17-20.
[4] 陈宇,陈旭,刘彤,等.成膜电位对316L不锈钢在硼酸溶液中电化学行为的影响[J].中国腐蚀与防护学报,2015,35(2):137-143.
[5] 张建春,左龙飞,蒋金洋,等.耐海水腐蚀钢筋00Cr10MoV的组织结构及性能研究[J].中国腐蚀与防护学报,2016,36(4):363-369.
[6] 曹国良,李国明,陈珊,等.典型耐海水腐蚀钢中Ni和Cr耐点蚀作用的比较[J].金属学报,2010,46(6):748-754.
[7] 石好,张璟,朱田兵.超高强钢22MnB5海水腐蚀性能研究[J].中国水运,2015,15(8):326-319.
[8] 曹国良,李国明,陈珊,等.Cu对低合金钢耐海水腐蚀的影响[J].材料工程,2011(9):62-67.
[9] 王杨,杨慧.用交流阻抗法研究铌钢在海水中的腐蚀行为[J].腐蚀科学与防护技术,2009,21(1):69-71.
[10] 邹妍,郑莹莹,王燕华,等.低碳钢在海水中的阴极电化学行为[J].金属学报,2010,46:123-128.
[11] Liu Baoyu,Han Guocheng,Li Yanghong.Corrosion inhibition and adsorption behavior of 2-((dehydroabietylamine)methyI)-6-methoxyphenol on mild steel surface in scawater[J].Thin Solid Films,2011,519:7836-7844.
[12] 张道达,孙衍乐,姚学峰,等.大变形轧制超细晶TWIP钢的组织及性能研究[J].江西师范大学学报:自然科学版,2017,41(1):62-66.
[13] 刘然克.典型H2S/CO2环空环境下高强油套管钢应力腐蚀机理与防护[D].北京:北京科技大学,2015.
[14] 王莹,俞宏英,程远,等.钙离子的浓度对X80钢腐蚀行为的影响[J].北京科技大学学报,2013,35(1):66-71.
[15] 张鹏,于浩.耐海水腐蚀钢10CrMoAl组织结构和性能研究[J].武汉科技大学学报,2010,33(2):176-179.
[16] 夏妍.破钢和耐候钢在若千典型环境下的腐蚀行为研究[D].杭州:浙江大学,2014.
[17] Ueji R,Tsuchida N,Terada D,et al.Tensile properties and twinning behavior of high manganese austenitic steel with fine-grained structure[J].Scripta Materialia,2008,59(9):963-966.
[18] 胡家元.碳钢在海水淡化一级反渗透产水中腐蚀机理及防腐方法研究[D].武汉:武汉大学,2013.
[19] 任呈强.N80油管钢在含CO:舰,S高温高压两相介质中的电化学腐蚀行为及缓蚀机理研究[D].西安:西北工业大学,2003.
[20] 张全成,王建军,吴建生,等.锈层离子选择性对耐候钢抗海洋大气腐蚀性能的影响[J].金属学报,2001,37(2):193-199.
[21] 张建春,黄文克,麻晗.耐蚀钢筋 20MnSiCrV 的连续冷却转变组织与性能[J].热加工工艺,2014,43(6):91-97.

备注/Memo

备注/Memo:
收稿日期:2017-09-05
基金项目:江西省重点研发计划(2016BBE50064)和江西省教育厅科研课题(GJJ161465)资助项目.
作者简介:张道达(1982-),男,山东聊城人,工程师,主要从事材料表面处理及材料加工工艺研究.E-mail:380831920@qq.com
更新日期/Last Update: 2018-08-20