[1]陈翔宇,简弃非.不锈钢薄板大功率激光点焊温度与应力特性研究[J].江西师范大学学报(自然科学版),2017,(05):447-453.
　CHEN Xiangyu,JIAN Qifei.The Analysis on Temperature and Stress Characteristics of Stainless Steel Sheet Under High Power Laser Spot Welding[J].Journal of Jiangxi Normal University:Natural Science Edition,2017,(05):447-453.
点击复制

不锈钢薄板大功率激光点焊温度与应力特性研究()
分享到：

《江西师范大学学报》（自然科学版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2017年05期
页码:
447-453
栏目:
出版日期:
2017-11-01

文章信息/Info

Title:
The Analysis on Temperature and Stress Characteristics of Stainless Steel Sheet Under High Power Laser Spot Welding
作者:
陈翔宇; 简弃非
华南理工大学机械与汽车工程学院,广东 广州 510640
Author(s):
CHEN Xiangyu; JIAN Qifei
College of Mechanical and Automobile Engineering,South China University of Technology,Guangzhou Guangdong 510640,China
关键词:
激光焊接;  有限元分析法;  304不锈钢
Keywords:
laser welding;  finite element analysis;  304 stainless steel
分类号:
TK 6
文献标志码:
A
摘要:
以0.5 mm厚的304不锈钢薄板为研究对象,采用热-结构间接耦合法,获取其在3 000 W功率光纤激光器点焊加工过程中温度场和应力场的分布特点及变化特性.在温度场模拟过程中采用修正的锥形热源模型,并将模拟得到的焊点形状与实验得到的形状进行对比.结果显示:运用该修正热源模拟得到的温度场分布特点与实际加工过程相吻合; 模拟得到熔池的凝固速度均在4 000 K·s-1以上,属于远离平衡态的快速凝固; 在焊接过程中,计算域的最大等效应力均分布在夹具位置,且在熔池周围出现环状的高应力区.
Abstract:
The 304 stainless steel sheet with 0.5 mm thickness is set as the research object.Thermo-structural indirect coupling method is used to obtain its distribution and variation characteristics of temperature field and stress field during the spot welding process of 3 000 W power fiber laser.In the temperature field simulation process,the modified cone-shaped heat source model is adopted,and the simulated solder joint shape is compared with another that obtained by the experiment under the same conditions.The results show that the temperature field distribution obtained by using the modified heat source is consistent with the actual process.According to the result of simulation,the solidification rate of the molten pool is above 4 000 K·s-1,which belongs to rapid solidification that is far from equilibrium.During the whole welding process,the maximum Von Mises stress of the calculated domain is distributed in the clamp position,and around the molten pool,the high stress zone appears.

参考文献/References:

[1] 侯培红.激光点焊薄硅钢片的工艺研究 [J].焊接技术,2017,46(2):43-46.
[2] 全玉强.硅钢片与不锈钢间的激光点焊工艺 [J].电机技术,2017(1):46-49.
[3] 刘毅.薄板不锈钢与铝合金激光点焊工艺及裂纹形成机理研究 [J].应用激光,2016,36(1):46-52.
[4] 李菊.钛合金低应力无变形焊接过程机理研究 [D].北京:北京工业大学,2004.
[5] 何小东,张建勋,裴怡,等.线能量对TC4 钛合金激光焊接残余应力和变形的影响 [J].稀有金属材料与工程,2007,36(5):774-777.
[6] 王凌云,王宏,张翔.熔池金属回流激光焊接小孔过程模拟 [J].电焊机,2013,43(10):22-27.
[7] 陈磊.大功率激光焊接熔池特性数值模拟 [D].兰州:兰州理工大学,2008.
[8] 杜汉斌.钛合金激光焊接及其熔池流动场数值模拟 [D].武汉:华中科技大学,2004.
[9] 胡宝.TC4 钛合金薄壁件激光焊接数值模拟研究 [D].天津:天津大学,2013.
[10] Duley W W.Laser welding [M].New York:John Wiley & Sons Inc,1998:69.
[11] 干勇,田志凌,董瀚,等.中国材料工程大典(第2卷)-钢铁材料工程(上)[M].北京:化学工业出版社,2006.
[12] Mills K C.Recommended values of thermophysical properties forselected commercial alloys [M].Cambride:Woodhead Publication Limited,2002.
[13] RoderickI L G,Takamichi I.液态金属的物理 [M].冼爱平,王连文,译.北京:科学出版社,2006.
[14] 王厚勤,张秉刚,王廷,等.电子束定点焊接 304 不锈钢熔池流动行为数值模拟 [J].焊接学报,2016,37(3):57-61.
[15] WonIk C,SuckJoo N,Claus T,et al.Numerical simulation of molten pool dynamics in high powerdisk laser welding [J].Journal of Materials Processing Technology,2012,212(1):262-275.
[16] 申丽娟,邢淑清,麻永林,等.304奥氏体不锈钢亚快速凝固组织演化和形成机理 [J].特殊钢,2012,33(4):53-56.
[17] 沈显峰,黄文荣,滕文华.辅助增强匙孔气流对激光焊接不锈钢组织和显微硬度的影响 [J].焊接学报,2013,34(4):19-23.

相似文献/References:

[1]赵 晶,曹颂阳,简弃非*,等.不锈钢薄板激光直缝焊过程的数值模拟与分析[J].江西师范大学学报(自然科学版),2018,(04):348.[doi:10.16357/j.cnki.issn1000-5862.2018.04.04]
　ZHAO Jing,CAO Songyang,JIAN Qifei*,et al.The Numerical Simulation and Analysis of Laser Straight Seam Welding Process of Stainless Steel Sheet[J].Journal of Jiangxi Normal University:Natural Science Edition,2018,(05):348.[doi:10.16357/j.cnki.issn1000-5862.2018.04.04]

备注/Memo

备注/Memo:
收稿日期:2017-05-15基金项目:国家自然科学基金(21776095),广州市产学研协同创新重大专项(201508010045)和广东省产学研合作(2016B090918034)资助项目.通信作者:简弃非(1963-),男,湖南邵阳人,教授,博士生导师,主要从事动力机械、新能源等方向的研究.E-mail:tcjqf@scut.edu.cn.
更新日期/Last Update: 1900-01-01