[1]简弃非,曹颂阳,赵 晶,等.不锈钢薄板激光点焊工艺对金相组织的影响分析[J].江西师范大学学报(自然科学版),2018,(04):336-341.[doi:10.16357/j.cnki.issn1000-5862.2018.04.02]
　JIAN Qifei,CAO Songyang,ZHAO Jing,et al.The Effects of Stainless Steel Laser Spot Welding on Metallographic Analysis[J].Journal of Jiangxi Normal University:Natural Science Edition,2018,(04):336-341.[doi:10.16357/j.cnki.issn1000-5862.2018.04.02]
点击复制

不锈钢薄板激光点焊工艺对金相组织的影响分析()
分享到：

《江西师范大学学报》（自然科学版）[ISSN:1006-6977/CN:61-1281/TN]

卷:
期数:
2018年04期
页码:
336-341
栏目:
出版日期:
2018-08-20

文章信息/Info

Title:
The Effects of Stainless Steel Laser Spot Welding on Metallographic Analysis
文章编号:
1000-5862(2018)04-0336-06
作者:
简弃非; 曹颂阳; 赵 晶; 肖金平
华南理工大学机械与汽车工程学院,广东 广州 510640
Author(s):
JIAN Qifei; CAO Songyang; ZHAO Jing; XIAO Jinping
School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou Guangdong 510640,China
关键词:
以厚度为0.5 mm的304不锈钢薄板作为研究对象; 通过实验探讨了不同工艺下激光点焊的金相组织、力学性能.经过焊点金相微观组织的观察和焊点拉伸强度的试验; 可得出结论:激光点焊焊接质量良好; 很少出现气孔、飞溅、焊接裂纹、未熔透、未熔合等焊接缺陷; 而且不同的激光功率密度或加热时间; 对焊点的形貌、尺寸和金相组织有很大影响;  焊点处的耐腐蚀性强度比母材低; 而且大部分焊点拉伸位移达到1.5 mm左右就会断裂; 平均拉伸强度比母材低281.2 MPa; 但平均屈服强度比母材高; 满足不锈钢薄板作为换热器的需求.
Keywords:
laser welding;  304 stainless steel sheet;  metallographic analysis;  mechanical properties
分类号:
TG 115.21
DOI:
10.16357/j.cnki.issn1000-5862.2018.04.02
文献标志码:
A
摘要:
以厚度为0.5 mm的304不锈钢薄板作为研究对象,通过实验探讨了不同工艺下激光点焊的金相组织、力学性能.经过焊点金相微观组织的观察和焊点拉伸强度的试验,可得出结论:激光点焊焊接质量良好,很少出现气孔、飞溅、焊接裂纹、未熔透、未熔合等焊接缺陷,而且不同的激光功率密度或加热时间,对焊点的形貌、尺寸和金相组织有很大影响; 焊点处的耐腐蚀性强度比母材低,而且大部分焊点拉伸位移达到1.5 mm左右就会断裂,平均拉伸强度比母材低281.2 MPa,但平均屈服强度比母材高,满足不锈钢薄板作为换热器的需求.
Abstract:
The microstructure and mechanical properties of laser spot welding of 304 stainless steel sheet with thickness of 0.5 mm are investigated by experiments.After the test of solder joint microstructure observation and tensile strength of the solder joints,the conclusion is drawn that the laser spot welding quality is good,lessporosity,spatter,weldingcracks,incompletepenetration,incomplete fusion welding defects,and different laser power density or heating time has a great influence on the morphology,size and solder joint microstructure,corrosion resistance of the solder joint strength is lower than the parent metal,and most of the solder joints tensile displacement reaches about 1.5 mm will break,the average tensile strength is 281.2 MPa lower than the parent material,but the average yield strength is higher than that of base metal,stainless steel sheet is used as a heat exchanger to meet the material requirement.

参考文献/References:

[1] 王志,胡芳友,崔爱永,等.激光焊接技术的研究现状及发展趋势[J].新技术新工艺,2016(3):42-44.
[2] 周学凯,米高阳,闫飞,等.不锈钢超薄板光纤激光焊接工艺和性能研究[J].应用激光,2017(4):521-526.
[3] 霍宏伟,胡海军,李治国,等.304不锈钢薄板激光焊搭接接头组织及性能[J].电焊机,2016,46(3):44-47.
[4] 张瑄珺,孙小兵,潘涌,等.304不锈钢薄板外观件激光焊接工艺研究[J].应用激光,2016(3):321-325.
[5] Yan Jun,Gao Ming,Zeng Xiaoyan.Study on microstructure and mechanical properties of 304 stainless steel joints by TIG,laser and laser TIG hybrid welding[J].Optics and Lasers in Engineering,2010,48(4):512-517.
[6] Liu Shuangyu,Li Yanqing,Liu Fengde,et al.Effects of relative positioning of energy sources on weld integrity for hybrid laser arc welding[J].Optics and Lasers in Engineering,2016,81:87-96.
[7] Wang Xiao,Gu Yuyuan,Qiu Tangbiao,et al.An experimental and numerical study of laser impact spot welding[J].Materials and Design,2015,65:1143-1152.
[8] Tan Caiwang,He Wenxiong,Gong Xiangtao,et al.Influence of laser power on microstructure and mechanical properties of fiber laser-tungsten inert gas hybrid welded Mg/Cu dissimilar joints[J].Materials and Design,2015,78:51-62.
[9] Kumar C,Das M,Paul C P,et al.Experimental investigation and metallographic characterization of fiber laser beam welding of Ti-6Al-4V alloy using response surface method[J].Optics and Lasers in Engineering,2017,95:52-68.
[10] Vandewynckéle A,Vaamonde E,Fontán M,et al.Laser welding head tailored to tube-Sheet joint requirements for heat exchangers manufacturing[J].Physics Procedia,2013,41:144-152.
[11] Chen Huichi,Bi Guijun,Nai M L S,et al.Enhanced welding efficiency in laser welding of highly reflective pure copper[J].Journal of Materials Processing Technology,2015,216(216):287-293.
[12] Miyagi M,Zhang Xudong,Kawahito Y,et al.Surface void suppression for pure copper by high-speed laser scanner welding[J].Journal of Materials Processing Technology,2017,240:52-59.
[13] Liebl S,Wiedenmann R,Ganser A,et al.Laser welding of copper using multi mode fiber lasers at near infrared wavelength[J].Physics Procedia,2014,56:591-600.
[14] Kuryntsev S V,Morushkin A E,Gilmutdinov A K.Fiber laser welding of austenitic steel and commercially pure copper butt joint[J].Optics and Lasers in Engineering,2017,90:101-109.
[15] Caiazzo F,Alfieri V,Corrado G,et al.Investigation and optimization of laser welding of Ti-6Al-4V titanium alloy plates[J].Journal of Manufacturing Science and Engineering,2013,25(135):1367-1374.

备注/Memo

备注/Memo:
收稿日期:2018-04-06
基金项目:国家自然科学基金(21776095)和广州市科学研究(201804020048)资助项目.
作者简介:简弃非(1963-),男,湖南邵阳人,教授,博士生导师,主要从事传热节能与新能源装备研究.E-mail:tcjqf@scut.edu.cn
更新日期/Last Update: 2018-08-20