参考文献/References:
[1] Yang Xiao,Yan Yuying,Mullen D.Recent developments of lightweight,high performance heat pipes[J].Applied Thermal Engineering,2012,33/34:1-14.
[2] Chen Xianping,Ye Huaiyu,Fan Xuejun,et al.A review of small heat pipes for electronics[J].Applied Thermal Engineering,2016,96:1-17.
[3] Ye Xin,Zhao Yaohua,Quan Zhenhua.Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array(MHPA)[J].Applied Thermal Engineering,2018,130:74-82.
[4] Tang Heng,Tang Yong,Wan Zhenping,et al.Review of applications and developments of ultra-thin micro heat pipes for electronic cooling[J].Applied Energy,2018,223:383-400.
[5] Yadavalli Y,Weibel J,Garimella S.Performance-governing transport mechanisms for heat pipes at ultrathin form factors[J].IEEE T Comp Pack Man Tech,2015,5(11):1618-1629.
[6] Zhou Wenjie,Li Yong,Chen Zhaoshu,et al.A novel ultra-thin flattened heat pipe with biporous spiral woven mesh wick for cooling electronic devices[J].Energy Conversion and Management,2019,180:769-783.
[7] Zhang Shiwei,Chen Jieling,Sun Yalong,et al.Experimental study on the thermal performance of a novel ultra-thin aluminum flat heat pipe[J].Renewable Energy,2019,135:1133-1143.
[8] Xin Fei,Ma Ting,Wang Qiuwang.Thermal performance analysis of flat heat pipe with graded mini-grooves wick[J].Applied Energy,2018,228:2129-2139.
[9] Ramachandran R,Ganesan K,Rajkumar M R,et al.Comparative study of the effect of hybrid nanoparticle on the thermal performance of cylindrical screen mesh heat pipe[J].International Communications in Heat and Mass Transfer,2016,76:294-300.
[10] Khalili M,Shafii M B.Experimental and numerical investigation of the thermal performance of a novel sintered-wick heat pipe[J].Applied Thermal Engineering,2016,94:59-75.
[11] Liu Wangyu,Gou Jingren,Luo Yuanqiang,et al.The experimental investigation of a vapor chamber with compound columns under the influence of gravity[J].Applied Thermal Engineering,2018,140:131-138.
[12] 洪宇平,李强,宣益民.小型平板热管传热实验研究[J].南京理工大学报:自然科学版,2001,25(1):32-35.
[13] 张丽春,葛新石,马同泽,等.微槽平板热管传热性能的实验研究[J].工程热物理学报,2003,24(3):493-495.
[14] 范春利,曲伟,杨立,等.微槽平板热管传热性能的实验研究[J].海军工程大学学报,2004,16(2):1-4.
[15] 陈文军.基于预成型的超薄铝平板热管多齿犁削机理及性能分析[D].广州:华南理工大学,2018.
[16] 陈杰凌.基于多孔吸液芯的超薄铝平板热管的制造及其传热性能研究[D].广州:华南理工大学,2018.
[17] Pis'mennyi E N,Khayrnasov S M,Rassamakin B M.Heat transfer in the evaporation zone of aluminum grooved heat pipes[J].International Journal of Heat and Mass Transfer,2018,127:80-88.
[18] Wong Shwin Chung,Liao Wei Siang.Visualization experiments on flat-plate heat pipes with composite mesh-groove wick at different tilt angles[J].International Journal of Heat and Mass Transfer,2018,123:839-847.
[19] 于程,刘向东,张孟臣,等.平板热管内气液两相流动与传热的可视化实验研究[J].工程热物理学报,2017,38(4):807-810.
[20] Yu Fawen,Yu Cheng,Cao Jianguang,et al.Experimental analysis of the evaporation regimes of an axially grooved heat pipe at small tilt angles[J].International Journal of Heat and Mass Transfer,2018,126:334-341.